6 Husqvarna 570BTS Problems that Occur Most Frequently

The Husqvarna 570BTS features an X-Torq engine with an air purge feature. It also has a very comfortable and ergonomic handle with a commercial-grade integrated air filter.

The Husqvarna 570BTS is most frequently plagued by starting issues, engine noise, fuel tank leaking, engine starting but dying slowly, excessive e smoke, and not enough power.

In this article, I’ll go through a few common Husqvarna 570BTS maintenance methods. So let’s start by looking over some of this blower’s characteristics and functions.

Features & Specifications of Husqvarna 570BTS:

Air Flow	768 CFM
Air Speed	236.2 MPH
Tube Length	47.126 Inches
Sound Pressure	76 dB
Vibration	1.8 m/s2
Cylinder Displacement	4
Maximum Power Speed	8000 RPM
Fuel Tank Volume	74.4 Ounces
Fuel Consumption	431 Grams per Kilowatt Hour

Common Husqvarna 570BTS Problems and Solutions

Problems with Husqvarna 570BTS	Solutions
Starting Issue	Inspect and fix issues with the spark plug.
Engine Noise	Use proper mixture and ensure ventilation.
Fuel Tank Leaking	Drain out the fuel and replace the fuel tank.
Engine Starting but Dying Slowly	Start the blower following the instructions.
Excessive Smoke	Clean the spark arrestor of the muffler.
Not Enough Power	Clean the air filter.

1. Starting Issue

Your Husqvarna 150 BT blower’s engine won’t start for several reasons. The problem is typically a dirty or moist spark plug that is not producing any spark.

Incorrect fuel type and an uncorrected idle speed might also contribute to this problem.

Other problems include clogged or worn starting pawls, spark plugs with poor electrode spacing, filthy or wet plugs that don’t spark, and loose plugs.

The Fix

First, check the starting pawls; if they appear worn or obstructed, be sure to clean the area surrounding the pawls.

If cleaning them doesn’t work, you should replace them. You should also inspect and carefully clean the spark plug.

Also, confirm that the fuel mixture is appropriate and that the spark plug is securely fastened in position.

If it is moist, dry it off with a cloth and make sure there is enough room between the electrode and the spark plug.

2. Engine Noise

If the engine of your Husqvarna 570BTS is making noise while using it to blow leaves, there might be an issue with the gasoline.

As a result of an improper mixture of gasoline and engine oil, the engine can make a loud noise.

The Fix

A combination of gasoline and two-stroke engine oil is required to operate the machine’s two-stroke engine at all times.

To guarantee that the proper mixture is achieved, it is crucial to precisely measure the amount of oil to be blended. Even little errors while combining tiny volumes of fuel can have a significant impact on the ratio of the mixture.

When handling gasoline, make sure there is enough ventilation.

3. Fuel Tank Leaking

If the fuel tank leaks fuel, you should not try to start the Husqvarna 570BTS blower. It might create a fire in situations.

You need to properly handle the blower and drain out all the fuel.

The Fix

First, clean the area around the fuel cap to avoid any kind of contamination. Now, try to shake the blower a little bit to find the area of the leak.

After that, drain out the fuel inside with an external pipe and store it somewhere safe. Now, you have to replace the old leaking fuel tank.

You can take the blower to any professional or to the Husqvarna company to get it fixed.

4. Engine Starting but Dying Slowly 

There might be an issue with the engine when you notice that it has suddenly died on you while working.

If this happens, you might be starting the blower in the wrong way. A proper warm start will fix the issue.

The Fix

Start by placing your palm on the ground and holding the machine’s body in place. Holding the starting handle in one hand, steadily draw the rope out with the other until you encounter resistance.

Now pull the string firmly and swiftly. Never wrap your hand around the starting cable.

Yank the cable repeatedly until the vehicle starts. Move the choke control to the start position before starting the engine.

Don’t let go of the starter lever while the starter cord is fully stretched, and be careful not to pull the starter rope out. This could harm the device.

5. Excessive Smoke

If you notice that the Husqvarna 570BTS blower is producing heavy smoke, there might be an issue.

The muffler’s primary function is to deflect fumes away from the user. Sparks from exhaust gases have the potential to start a fire if they come into contact with dry, flammable material.

Smoke will be produced if the muffler’s spark arrestor is not wiped.

The Fix

You need to clean the spark arrestor of the muffler to fix this issue. First of all, detach the exhaust duct and disconnect the spark arrestor.

Now, take the screen of the spark arrestor out. Clean it properly with a cloth and brush. If it has not been cleaned for many months, you might even need to replace it.

Also, be sure to clean the carbon buildups from the inside of the exhaust port.

6. Not Enough Power

Most of the time, the Husqvarna 570BTS blower works smoothly, without any sign of trouble.

But if you neglect cleaning the air filter, it might become slower and slower. So, you should clean it every week if you blow heavily.

The Fix

To clean the air filter, first, take out the bolts. Now, detach the air filter and clean it with water. Use some cleaner, brush, and cloth to clean it properly.

Now, dry the filter and reinstall it.

Frequently Asked Questions (FAQs)

Conclusion

These are the most common Husqvarna 570BTS problems that most users face. I have included the most effective solutions to these issues.

Follow my instructions to get your faulty Husqvarna 570BTS fixed.

Related Posts:

• 6 Husqvarna 150BT Problems that You Should Know About
• Ryobi 2 Cycle Blower Problems and Their Fixes
• Husqvarna Leaf Blower Problems that New Buyers Should Know About
• Husqvarna 525BX Petrol Leaf Blower Problems that New Buyers Should Know About
• Husqvarna 580BTS Problems that New Buyers Should Know About