8 Reasons Why Electric Leaf Blower Won’t Turn On!

If your electric leaf blower won’t turn on when you’re ready to start working, it may be annoying. This may occur for a number of frequently occurring causes.

Dead batteries, clogged air filters, tripped circuit breakers, and broken cords are a few causes. A broken switch or blown fuse is another reason. The motor itself may occasionally be damaged and need to be repaired or replaced.

In this post, each of these causes will be discussed in detail. After reading this post you can quickly fix your electric leaf blower.

Why Does My Electrical Leaf Blower Refuse to Turn On?

An electrical leaf blower may not turn on for a number of reasons. The blower won’t get electricity and won’t operate if the outlet isn’t working or the cord isn’t correctly plugged in.

If the blower is cordless, the battery may also be the cause. Even with a correctly connected blower, a dead or low battery might prohibit it from working.

Another potential cause of an electrical leaf blower not starting is a blocked air inlet. The blower’s performance may be hampered if there is debris obstructing the air intake.

Another major factor of an electrical leaf blower not starting is a broken switch. If it isn’t working correctly, the motor won’t receive electricity, which stops the blower from operating.

8 Reasons of the Electric Leaf Blower Won’t Turn On (Easy Fixes Included)

Here are some symptoms or reasons that will signify that the Electric leaf blower has a malfunction. The fixes are also included.

1. Lack of Power

When the switch is switched on, the blower does not react by making any noise or vibrating. Both the fan blades and the motor are inactive.

The Fix

Make that the outlet is operating correctly. If other devices in the same outlet aren’t functioning, there may be a problem with the outlet itself that has to be fixed.

Try connecting the blower into a different socket if the one it is now plugged into appears to be working well.

2. No Response From the Switch

The switch does not appear to work when it is switched on, and the blower does not respond. When pushed, the switch could feel slack or not work correctly.

The Fix

Check the switch for any obvious damage, such as fractures or broken pieces. The switch will need to be replaced if it looks to be damaged.

Disconnect the wire after removing the screws holding it to the blower. Reconnect the wire after replacing the switch.

Check the wiring connecting the switch to the motor if the switch seems to be in excellent shape. Verify that the wire is solid and unbroken or otherwise compromised. Repair or replace the damaged wiring if necessary.

3. No Airflow

Even with the switch turned on, the blower does not create any air flow. Other potential symptoms include a lack of suction or a weaker air flow than when the blower was operating correctly.  

The Fix

Remove any debris that may be blocking the air intake. This may include leaves, grass clippings, or other debris. Clean the area around the air intake to make sure it is free from obstructions.

If the filters are dirty or clogged, clean or replace them. This will improve air flow and prevent the motor from overheating. Make sure there are no other blockages in the air path that could be restricting air flow.

4. Overheating

When the blower gets too hot to the touch, it may stop working for a brief time. This may occur as a result of an obstruction in the air intake, which limits airflow and overheats the engine.

The Fix

Verify that the fan or impeller is freely rotating and appropriately positioned. Replace it if it has been damaged.

Look for any evidence of damage, such as cracks or broken pieces, on the motor. Replace the motor if it is damaged. Make sure there is enough airflow for the blower and that it is not being operated in a small area.

5. Dead Battery

The battery is either unable to maintain a charge or is insufficiently powerful to run the blower. The blower can cut off after a brief time of operation or the battery indicator light might show a low battery.

The Fix

Charge the battery for the necessary amount of time. Look for any evidence of deterioration, such as cracks or swelling, on the battery. Replace the battery if it is damaged.

Verify that the battery is receiving enough power from the charger and that it is operating correctly. Replace the damaged charger immediately. Replace the battery with a new one if the old one isn’t keeping a charge.

6. Tripped Circuit Breaker

If a blower is hooked into an outlet, it may trigger a circuit breaker to trip, cutting off power to the blower.  

The Fix

As directed by the manufacturer, charge the battery for the specified amount of time. Look for any evidence of deterioration on the battery, such as swelling or cracks. Replace the damaged battery right away.

Verify the charger’s efficiency and the battery’s ability to receive adequate power. Replace the charger if it is broken. Replace the battery with a fresh one if it isn’t maintaining its charge.

7. Damaged Cable

If the blower is hooked into an outlet, a damaged cord might render it unable to receive electricity. A frayed, cut, or exposed wire in a damaged cable might result in a short circuit.

The Fix

Check the cord’s full length for any obvious damage, such as frayed wires, cuts, or insulation cracks. If the cord is broken, you may either fix it by covering the broken section with electrical tape or get a new chord.

Look for any symptoms of damage on the plug, such as cracked prongs or a harmed case. Replace the damaged plug if necessary. Once the cable has been fixed or replaced, test the blower to make sure it is operating correctly.

8. Clogged Air Filter

The air vents or filters may be obstructed by debris, which can limit airflow and impair the blower’s performance.

The Fix

Either unscrew the air filter or pry it free from its housing to remove it. To remove any loose material from the air filter, tap it against a hard surface. To carefully remove any obstinate particles, use a soft-bristled brush.

The air filter should be put back into its housing and fastened. Check the blower’s functionality after cleaning and replacing the air filter.

Frequently Asked Questions (FAQs)